How to replace the power board for Eve Single S-line and Pro-line

Overview

This guide explains how to safely replace the power board of an Eve Single S-line or Pro-line charging station from disconnection to reassembly.

Safety precautions

Ensure the power supply is completely disconnected before beginning any work to prevent electrical hazards. Always wear insulated gloves and safety glasses to protect yourself from potential electrical and mechanical injuries. Verify that the replacement components match the specifications of the original parts to avoid compatibility issues. Handle all tools and components with care and follow the instructions or service manual to ensure proper installation and maintain safety throughout the process.

Recommended tools

We recommend using the following tools:

Screwdriver
Multimeter

Step-by-step instructions

Please make sure that power to the charging station has been disconnected before opening the charging station and performing these steps.

1. Preparing the charging station

Open the charging station panel.
Remove obstructing components; detach any subframes or other parts preventing access to the power board.
Unscrew and set aside the screws securing the subframe.

2. Disconnect the cables

Detach the following cables:
- Blue, brown, black, and grey cables: open the white lid and gently pull each cable.
- Flat cable: located beneath the black and grey cables; carefully disconnect it.
Remove the actuator (socket lock motor) and the socket lock cable.

3. Remove the power board

Unscrew the power board from its mount.
Disconnect the remaining wiring:
- Blue, brown, black and grey cables: open the white lid and gently pull each cable.
- Green connector: detach the connector that houses the brown and blue cables.
Carefully lift the power board.

4. Install the new power board

Position the new power board in place.
Reconnect all cables and components in the reverse order of disassembly.
- Attach the colored power cables in the correct order, using the markings on the PCB as a guide.

5. Final check

Confirm that all cables are securely connected and components are properly assembled.
Restore power to the charging station and test its functionality.

Summary

To replace the power board of an Eve Single S-line and Pro-line charging station, first disconnect the power and remove obstructing components. Detach all cables, unscrew the power board, and carefully lift it, ensuring the header is transferred to the control board. Install the new power board by reversing the steps, securing cables in the correct order.