Overview
The installation and cables should be installed to match the maximum charging current to the input of the charging station.
The diversity factor shall be taken as equal to 1, unless the maximum continuous current is limited by load control.
The installer is always responsible for choosing the right cable diameter and complying with the relevant standards and legislation.
For the maximum diameter of the incoming power cables on the connection clamps, please refer to the installation manual that is shipped with the product in question.
Installation manuals
Installation manuals can be found here.
| Your installation must comply with the standards and regulations of the country and region the charging station will be installed in. Therefore, always follow the most recent installation guidelines for the location in question. |