This article explains error code 101
Applicable platform:
This error code can be found on chargers using the below platform(s):
- AHP (Alfen Hardware Platform)
- NG (Next Generation)
Error code 1xx | Error codes inside charge point
Error codes starting with '1' indicate that the most likely cause for the error is related to an issue inside the charger.
Error code:
101
Error message on display:
One moment please.
Your charging session will resume shortly.
Possible Cause:
DC fault current (>6mA) detected by charging station.
Possible solutions:
One specific vehicle: Contact your car dealership.
All vehicles: Contact the service department of your charge point supplier.
OCPP Statusnotification:
Info field: RCD signalled, DC power actual 8.5mA
OCPP 1.5: Groundfailure
OCPP 1.6/2.0.1: Groundfailure
Suggestions: